All help topics

Help Article

Location-Based Booking

Location-Based Booking is designed for mobile service providers — cleaners, mobile mechanics, in-home technicians, pet groomers, and anyone who travels to clients. It automatically hides time slots that aren't realistically reachable given your existing appointments and travel time.

How It Works

What happens when a client uses the location booking link?

1The client picks a date.
2The client enters their address using Google Places search.
3The system fetches your existing appointments for that day.
4It calculates the travel time between each appointment location and the client's address.
5Time slots that are unreachable given travel time are hidden automatically.
6The client picks from the remaining valid slots and completes the form.

What is the Base Address?

Your base address is your home or starting location. The system assumes you start the day from base and return to base between appointments, after blocked periods, and at the end of your schedule breaks. This is used to calculate whether you can reach the next client in time.

What counts as a 'return to base' anchor?

The system treats these as base anchors — moments when you are assumed to be at your base address:
  • The start of your working day
  • Any manually blocked/unavailable time slots
  • Gaps between your time ranges (e.g., your lunch break)

What commute modes are supported?

Car/Driving, Public Transit, Bike, and Walking. The travel time calculation uses your selected mode and real map data.

Setup

1Go to Location-Based Booking in the sidebar.
2Toggle "Enable Location-Based Booking."
3Select your commute mode.
4Set your timezone.
5Enter your Base Address.
6Share the Location Booking Link from the same page.

Important Notes

Should I head back to base between appointments?

Yes — the system assumes you are heading back to your base address after each appointment. If you stay at a client's location, the travel estimates may not match reality. For best accuracy, start heading back after each job.

What about appointments without a recorded address?

Appointments without a delivery address are blocked using your standard buffers only — they don't contribute to travel time calculations.

Is client address information shared between clients?

Never. Clients only see which time slots are available or unavailable — no other clients' addresses or schedule details are ever exposed.

Solo Entrepreneur Mode

What is Solo Entrepreneur Mode?

Solo Entrepreneur Mode is what happens when a client books through your Main Booking Link or Bonus Link (not the Location Booking Link). Instead of asking the client for their address, the system uses your base address as the reference point for all travel time calculations. This means the same travel-aware slot filtering applies — the system checks whether you could realistically travel from your base to each appointment, and hides slots that aren't reachable.

When would I use Solo Entrepreneur Mode vs the Location Booking Link?

Use the Location Booking Link when you want clients to enter their own address and the system dynamically filters slots based on where they are. Use your Main or Bonus Booking Link (Solo Entrepreneur Mode) when you want the travel-aware filtering to work silently in the background using your base address — without asking clients for their location. This is useful if all your clients are in a similar area, or if you prefer to collect addresses separately through your custom form fields.

Do I need to do anything to enable Solo Entrepreneur Mode?

No — it activates automatically when Location-Based Booking is turned on and a client uses your Main or Bonus Booking Link. Just make sure your Base Address is set on the Location-Based Booking settings page.

Booking by Phone with the AI Receptionist

Can the Talki Talki AI receptionist book location-based appointments?

Yes. With Talki Talki connected and AI Receptionist booking turned on, callers get exactly what your Location Booking Link gives web visitors: the receptionist asks where they are, checks real travel time against your day, and offers only the times you can reach. Example call: “Hi, I need my MacBook screen fixed, I’m at 7910 Rue Foucher in Montreal, is Monday afternoon possible?” — the receptionist confirms the address, checks Monday, and says something like “On Monday we have 1:00 PM, 1:30 PM and 2:00 PM. Which works for you?”

What is the proper setup? (checklist)

1Location-Based Booking page: turn on Dynamic Availability, enter your Base Address (where you start your day, e.g. your shop or home), pick your Commute Mode (driving, transit, bike or walking).
2Availability page: set your Business Timezone to where you actually work. This is the timezone the receptionist speaks in. Then set the same timezone on the Location-Based Booking page so travel checks line up. If your business is in Toronto but a timezone says Vancouver, the caller hears times three hours off.
3Decide how the address is asked: turn Location Booking Link ON if every caller must give their address before any time is offered (recommended for cleaners, mobile mechanics, in-home repair). Leave it OFF to book like your main link — the receptionist filters by travel only when a caller gives an address; otherwise the caller gets your standard open times with no travel filtering.
4Availability page: use realistic working hours and an appointment duration of 30 minutes or more. With a 5-minute duration and all-day hours the receptionist gets hundreds of slots and struggles to read them out.
5Customize Booking Form: keep a phone field so the caller gets an SMS confirmation. Any question marked required is asked on the call; drop-down choices are offered as choices; format rules (e.g. a serial-number pattern) are enforced.
6Integrations page: connect Talki Talki and click "Enable AI Receptionist booking". Whenever you change your booking form or your location settings, click "Re-sync tools" so the receptionist learns the new questions.

What exactly happens on the call?

1The caller asks for a day. If Location Booking Link is on, the receptionist first asks for the street number, street name, city and province, and reads it back.
2Booki Booki computes the open times for that day from your hours, buffers and existing bookings, then removes any slot you could not reach from your previous job (or from base) in time.
3The receptionist offers the first few times and more on request, e.g. “Anything in the afternoon?”
4Once the caller picks a time, the receptionist collects their full name and every required question from your form, then reads the whole booking back and asks for a clear yes.
5A final travel-time check runs, the appointment is booked, and the caller hears the confirmation. The card appears on your Workflow Board with the address, one-tap directions and the caller's phone number filled in.

Examples of what callers can say

  • “Can someone come clean a two-bedroom in Richmond Hill this Thursday morning?” — the receptionist asks for the exact address, then offers Thursday-morning times that fit your route.
  • “My car won’t start at 141 Castle Rock Drive, what’s the earliest you can get here?” — it checks today and offers the first reachable time; if today is full it suggests the next open days.
  • “Do you have anything Monday afternoon?” — it offers only afternoon times, if any are reachable, and suggests other days when the afternoon is full.

The receptionist said a time was not available, but my calendar looks free. Why?

Usually travel time. A slot right after another job across town is hidden even though the calendar shows a gap. Other reasons: the caller’s address could not be found on the map (the receptionist asks them to confirm street number, street name and city), the time is inside your booking-notice window, or the day is beyond your days-in-advance limit.

Does my Blocklist apply to phone bookings?

Yes, and it is strict. If the caller’s phone number (when your form has a phone field), email, or an answer such as a model number matches a Blocklist entry, the booking is declined. The caller only hears your rejection message (or a neutral “I can’t complete this booking right now”), never the reason. Keep that in mind when testing with your own details: if you blocklisted “A1466” and then tell the receptionist your model is A1466, the booking will be refused.

Do callers ever hear other clients' addresses?

Never. The receptionist only says which times are open or not. Addresses and schedule details of other clients are not spoken or shared.
⚠Note: Location-Based Booking is a Pro plan feature and requires Deliveries to be enabled as a prerequisite. AI Receptionist booking requires a Talki Talki plan that includes the AI receptionist.